Cooper M3000 Uživatelská příručka stáhnout pdf (Strana 296)

5-14 SPARC Enterprise Mx000 Servers XSCF User’s Guide • December 2010

showdcl / setdcl

The showdcl(8) command displays the domain configuration information (DCL) specified

for individual domains or LSBs that compose a domain, and the setdcl(8) command

specifies the configuration. The system administrator refers to and specifies DCL when

adding an XSB to a domain.

showfru / setupfru

The showfru(8) command displays the locations of devices, such as system boards,

mounted in the server and resource partition information, and the setupfru(8) command

specifies these locations and this information. The system administrator can use the

commands for effective use of resources.

addfru / deletefru / replacefru

The addfru(8) command is used to select a device, such as a CPU/Memory Board unit, I/O

unit, fan unit, or PSU, to add it to the server, and the deletefru(8) and replacefru(8)

commands are used to select and remove or replace, respectively, such a device mounted in

the server. Each type of operation can be performed interactively with menus.

showboards / addboard / deleteboard / moveboard

The showboards(8) command displays status information about a system board (XSB).

The system administrator can use the command to find out whether a system board has been

configured to a domain or unconfigured from it, and to find out whether this operation was

successful. The addboard(8) command adds a system board to the domain, the

deleteboard(8) command removes a system board, and the moveboard(8) command

moves a system board.

Note – In the M3000 server, the domain configuration cannot be changed.

showdomainmode / setdomainmode

In a certain domain, the user may want to suppress the break signal or panic with host

watchdog or disable the automatic boot function. The system administrator can use the

showdomainmode(8) command to display the related function settings and the

setdomainmode(8) command to suppress or disable one of these functions for a domain.

Also, the showdomainmode(8) command displays a domain host ID and ethernet address

(mac address).

1 2 ... 291 292 293 294 295 296 297 298 299 300 301 ... 431 432

Žádné komentáře

Cooper M3000 Uživatelská příručka Strana 296