Cooper TS690 Instalační manuál stáhnout pdf (Strana 32)

06 Bell Duration

This controls the duration of the external

bell/sounder. If the timer is set to 199 the bell

output is continuous. This timer has a working

range of 000-199 minutes. (Default: 020 Mins)

07 Bell Delay

This timer delays the activation of the external

bell/sounder and internal sounders. This timer

has a working range of 000-199 minutes. Note:

Any alarm during the entry procedure will

cancel the bell delay. (Default: 000 Mins)

08 2 Act. Time (Double Knock)

This is the “Double Knock” time window in which

either two circuit activation must occur within

this time to generate an alarm condition. Or

the circuit must remain active for the whole

duration of this time to generate an alarm

condition. This will only apply to circuits with the

“Double Knock” attribute. This timer has a

working range of 000-199 seconds. (Default:

008 Secs)

09 Test Time

This timer varies the number of days that “Test”

attribute may be applied to a circuit. If the

timer is set to 000 then circuits will remain on

test until the “Test” attribute is removed. This

timer has a working range of 000-030 days.

(Default: 014 Days)

10 2nd Entry

When the “Entry Timer” has expired the “2nd

Entry timer” starts to count down, if at the end of

this time the system or area has not been unset

then a full alarm will be generated. This timer

has a working range of 000-199 seconds.

(Default: 015 Secs)

11 P.Set Entry

This timer sets the entry period for the system

when the system is in the part-set condition. If

the timer is set to 000 the part-set entry timer is

the same as the main entry timer (timer 05). This

timer has a working range of 000-199 seconds.

(Default: 000 Secs)

12 Monitor Dur.

This timer affects the duration of the “Timed

Output” (No. 042). This timer has a working

range of 000-199 minutes. (Default: 000 Secs)

13 P.Set Bell Dly

This timer delays the activation of the external

bell/sounder and internal sounders when the

system is part set. Note that this timer operates

when alarm confirmation is disabled, and has

no effect when alarm confirmation is enabled.

This timer has a working range of 000-199

minutes. Note: Any alarm during the entry

procedure will cancel the bell delay. (Default:

000 Mins

14 Courtesy Dur.

This timer is used to control the duration of the

output type “Courtesy Light”. This timer has a

working range of 000-199 seconds. (Default:

030 Secs)

15 No. Rem. Resets

This counter determines how many coded

“Remote Resets” can occur before the system

locks into engineer reset only. Note: Remote

Reset by the "Rem Reset" input terminal is also

affected by this counter. This counter has a

working range of 000-199. (Default: 010)

16 Modem Rings

This counter is for use with the DC6, it allows the

installer to specify how many rings are required

before the DC6 picks up the call. If the counter

is set to 000 it will pick the call up as soon as any

incoming ringing is detected. This counter has

a working range of 000-199. (Default: 005)

17 P.I.D Alarms

When using the DC6 and "Contact ID

Extended Reporting". The number of Contact

ID alarms that are transmitted to the central

station per circuit are controlled by the value of

this counter. e.g., if the counter is set to 003

then all circuits will report 3 activation’s before

they are locked out from sending any more.

Note: this does not affect the re-arm of the

zone. This counter has a working range of 000 -

199. (Default: 005)

18 AC Off Dly

This timer delays the “audible” mains off

indication when the mains power is removed.

The display and any outputs programmed as

“Mains Off” are not affected. This timer has a

working range of 000-199 minutes. (Default:

000 Secs)

Engineer’s Menu 1 TS690 & TS690ID Installation Manual

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 59 60

Komentáře k této Příručce

Žádné komentáře

Cooper TS690 Instalační manuál Strana 32

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Cooper TS690